Life sized replica of a baby skunk. cable controlled puppet with head side to side-up & down,nod.  tail side to side with tentacle mechanism end.  Mounting point out bottom of chest.  Jointed legs for swaying  using the chest rod.

Life sized replica of a baby skunk. cable controlled puppet with head side to side-up & down,nod.  tail side to side with tentacle mechanism end.  Mounting point out bottom of chest.  Jointed legs for swaying  using the chest rod.

http://www.animalmakers.com/store/products/Realistic-Camel-Replica.html

This item is a life-sized dromedary camel and it can stand or lay in your display. The laying version is pictured and was created for the U.S. Marines as a dead camel training prop.  Yours can be a standing version.  We show the sculpture as well, so you can see that it will stand and..

Price: $23,250.00 $18,500.00

This item is an accurate replica of a king penguin. First sculpted in clay, then molds created, then parts of the body, face, beak assembled. This is a process that takes time and attention to detail. King penguins are the most popular. Partially because of the "March of the Penguins" movie. Th..

Price: $910.00 $420.00

This beaver is an adult and in the semi-upright position.  The stock (rental) item's body moves forward and back and side to side.  It's tail goes up and down and side to side.  It's arms are poseable. It is 26" from head to base of tail.  All animatronic controllers ar..

Price: $6,887.50 $6,543.13

This item is a hand puppet version of an animatronic character (Iitem #3510).  As a hand puppet, the performer gets alot of motion.  The fur is handwoven, National Fiber Tech.  There is a heavy duty backing that stretches both directions.  Hand slips in the bottom to operate..

Price: $9,062.50 $7,500.00

Animatronic: Pecks and looks around.  Head goes forward and back and rotates left and right.  The body is black and white, the head is piliated (crested) red, and the underwings are spotted. This model has the wings to the body's side and pecks on a tree.  19" long.  We also..

Price: $8,337.50 $7,920.63

Animatronic: Black Bull offering leg action, massive head action, no mouth moves. Whips head back and forth, up & down, legs "RUN" and kick dirt, Very realistic action and look. Requires 7 people on four controllers to operate. One of the operators is a dolly grip (for filmaking version) or..

Price: $25,000.00 $21,500.00

Gorgeous Toucan (Socrates) with black and yellow feathers and fur. Silicone facial wrap goes between the dual moving beaks to add to the realism.

People always look closer when they see this fellow talk. Mouth talks, neck bows, looks side to side and cocks it's head at various angl..

Price: $8,450.00

This item is a large, Pacman frog that was first sculpted, then molded, then cast in latex and polyfoam.  An interesting work of art.  It was done as part of a presentation to Anheuser Busch's advertising agency.  This character is an alternate "Bud" frog.  He should be hang..

Price: $1,812.50 $1,721.88

Animatronic: Pecks and looks around.  Head goes forward and back and rotates left and right.  The body is black and white, the head is piliated (crested) red, and the underwings are spotted. This model has the wings to the body's side and pecks on a tree.  19" long.  We also..

Price: $3,737.50

ANIMATRONIC: This cat was the original "Salem" the animatronic cat from the hit TV show "Sabrina the Teenage Witch." (sitting position). 

Full range of head motion, eye blinks, eyes go side to side, mouth "Talks" using 3 different moves and the tail flips around. Requires two ..

Price: $18,125.00 $2,500.00

Artificial cat stuffy with flexible arms. Lightweight model that could warm any environment. Have it sitting in any display and listen for the comments. Hollow inside, with plastic body and West German fur laid over it.

Artificial cat stuffy with flexible arms. Lightweight model that could warm any environment. Have it sitting in any display and listen for the comments. Hollow inside, with plastic body and West German fur laid over it.

Rust Resitant Model (Aluminum framework, stainless steel pump and valves)
Animations included: Mouth open/shut, Head up/down & side to side, legs move, built to work around water, but not fully submerged. 9'-6" (2.9 m) long. Silicone skin and soft teeth (for safety). ..

Price: $9,500.00

]]>

Rust Resitant Model (Aluminum framework, stainless steel pump and valves)
Animations included: Mouth open/shut, Head up/down & side to side, legs move, built to work around water, but not fully submerged. 9'-6" (2.9 m) long. Silicone skin and soft teeth (for safety). ..

Price: $9,500.00

]]>

http://www.animalmakers.com/store/products/Animatronic-Alligator-Rig.html Wed, 15 Apr 2009 13:05:24 +0000 http://www.animalmakers.com/store/products/Animatronic-Alligator-Rig.html

Works in the water with a simple monofilament pull. This is an alligator created in urethane. This prop offers a flexible body and tail. Very realistic full scale look. Perfect to back up (or create) an alligator attack.  Approximately 9' long. Should be crated prior to shipping. Fits into..

Price: $37,500.00 $35,000.00

]]>

Works in the water with a simple monofilament pull. This is an alligator created in urethane. This prop offers a flexible body and tail. Very realistic full scale look. Perfect to back up (or create) an alligator attack.  Approximately 9' long. Should be crated prior to shipping. Fits into..

Price: $37,500.00 $35,000.00

]]>

http://www.animalmakers.com/store/products/Alligator-Stuffy-2.html Wed, 15 Apr 2009 13:11:53 +0000 http://www.animalmakers.com/store/products/Alligator-Stuffy-2.html

This item is a flexible, stuffy, realistic, full-sized at 9'0" long model of an alligator ready to work in the water.  Created from tough urethane foam with a latex skin and good paint job.   Looks great at water's edge or even in the water.  Inside of mouth fully detailed.&..

Price: $2,500.00 $1,750.00

]]>

This item is a flexible, stuffy, realistic, full-sized at 9'0" long model of an alligator ready to work in the water.  Created from tough urethane foam with a latex skin and good paint job.   Looks great at water's edge or even in the water.  Inside of mouth fully detailed.&..

Price: $2,500.00 $1,750.00

]]>

http://www.animalmakers.com/store/products/Alligator-Snapping-Rig.html Wed, 15 Apr 2009 13:16:03 +0000 http://www.animalmakers.com/store/products/Alligator-Snapping-Rig.html

This item is a rod controlled puppet. A must if your show is planning an alligator attack. Two seperate levers animate the head for snapping and biting action. This rig snaps onto a wheel rig to move around a wet set. You get the snapping Alligator Head and over one meter of front-of-body. Oper..

Price: $8,500.00 $850.00

]]>

This item is a rod controlled puppet. A must if your show is planning an alligator attack. Two seperate levers animate the head for snapping and biting action. This rig snaps onto a wheel rig to move around a wet set. You get the snapping Alligator Head and over one meter of front-of-body. Oper..

Price: $8,500.00 $850.00

]]>

http://www.animalmakers.com/store/products/Frog-%252d-Don%27s-Pacman-%252d-Animatronic-%28Weekly-Rental%29.html Wed, 15 Apr 2009 14:34:28 +0000 http://www.animalmakers.com/store/products/Frog-%252d-Don%27s-Pacman-%252d-Animatronic-%28Weekly-Rental%29.html

This item is a large, Pacman frog that was first sculpted, then molded, then cast in latex and polyfoam.  An interesting work of art.  It was done as part of a presentation to Anheuser Busch's advertising agency.  This character is an alternate "Bud" frog.  He should be hang..

Price: $812.50

]]>

This item is a large, Pacman frog that was first sculpted, then molded, then cast in latex and polyfoam.  An interesting work of art.  It was done as part of a presentation to Anheuser Busch's advertising agency.  This character is an alternate "Bud" frog.  He should be hang..

Price: $812.50

]]>

http://www.animalmakers.com/store/products/Flea-Character-%252d-Oversized-%252d-Poseable-%28New-Build-Purchase%29.html Mon, 23 Mar 2009 13:48:55 +0000 http://www.animalmakers.com/store/products/Flea-Character-%252d-Oversized-%252d-Poseable-%28New-Build-Purchase%29.html

This oversized flea replica was created for a Verizon commercial in 2008. It is created with a Self-skinning foam body and covered with a short flocked fur. The entire creation (head, legs and antennas) is completely poseable. This flea is 9" X 9" X 5" and the weighs in at 1 pound. Although thi..

Price: $4,350.00 $4,132.50

]]>

This oversized flea replica was created for a Verizon commercial in 2008. It is created with a Self-skinning foam body and covered with a short flocked fur. The entire creation (head, legs and antennas) is completely poseable. This flea is 9" X 9" X 5" and the weighs in at 1 pound. Although thi..

Price: $4,350.00 $4,132.50

]]>

http://www.animalmakers.com/store/products/Terrier%2C-Small-%28New-Build-Purchase%29.html Mon, 23 Mar 2009 13:48:28 +0000 http://www.animalmakers.com/store/products/Terrier%2C-Small-%28New-Build-Purchase%29.html

Snappy the small terrier rig, attaches to a person as if it's latched on with it's jaws, the back legs kick (at the touch of a switch) and the body swings back and forth at the neck. Measurements: 17" nose to base of tail, 9" tall at the shoulder, mostly tan in color.

Using molds alr..

Price: $7,105.00 $6,749.75

]]>

Snappy the small terrier rig, attaches to a person as if it's latched on with it's jaws, the back legs kick (at the touch of a switch) and the body swings back and forth at the neck. Measurements: 17" nose to base of tail, 9" tall at the shoulder, mostly tan in color.

Using molds alr..

Price: $7,105.00 $6,749.75

]]>

http://www.animalmakers.com/store/products/Small-Terrier-Replica.html Wed, 22 Apr 2009 11:36:56 +0000 http://www.animalmakers.com/store/products/Small-Terrier-Replica.html

Snappy the small terrier rig, attaches to a person as if it's latched on with it's jaws, the back legs kick (at the touch of a switch) and the body swings back and forth at the neck. Measurements: 17" nose to base of tail, 9" tall at the shoulder, mostly tan in color.

Using molds alr..

Price: $3,185.00 $950.00

]]>

Snappy the small terrier rig, attaches to a person as if it's latched on with it's jaws, the back legs kick (at the touch of a switch) and the body swings back and forth at the neck. Measurements: 17" nose to base of tail, 9" tall at the shoulder, mostly tan in color.

Using molds alr..

Price: $3,185.00 $950.00

]]>